Skip to main content

Heat Parameters

Here you can configure the heat-specific parameters of your wärmeleser.

Meter parameters​

Meter type​

Select the type of your heat meter:

  • Mechanical heat meter
  • Digital heat meter
  • Heat meter with pulse output

Meter constant​

Enter the meter constant of your heat meter:

  • You can find it on the meter nameplate
  • Usually given in kWh/pulse or similar units

Unit​

Select the desired unit:

  • kWh (kilowatt hours)
  • MWh (megawatt hours)
  • GJ (gigajoules)

Temperature parameters​

If your wärmeleser supports temperature sensors:

Flow temperature​

  • Configure the flow temperature sensor
  • Check calibration

Return temperature​

  • Configure the return temperature sensor
  • Check calibration

Next step​

After configuring the parameters, you can complete the configuration.